What seats fit which Eagles?

From Eaglepedia
Revision as of 18:17, 6 December 2005 by IowaEagle (Talk | contribs)

Jump to: navigation, search

Contributed by way2phastphil

Eagle Seat Interchange

There were several different styles of seats offered in Eagles. This topic will show the different styles, and discuss interchange between cars. Photos will be added at a later date. This topic will NOT discuss putting in seats from other vehicles, such as Jeep Cherokees, since each case is unique.

The information presented here is based on what I have found on Eagles I have owned over 
    the years, or was derived from dealer brochures, etc. 

Sport seats. These were high-back bucket seats. They were found only in the Series 50 cars, i.e., SX-4 and Kammback. Since they were used in 2 door cars, they tilt forward to allow access to the rear seat. Keep this in mind if you are planning on putting other seats in these cars.

PIC will be here

Wide-body seats: These were standard in the Series 30 cars, i.e., the 2-door Coupe, 4-door Sedan, and Wagon. They were available in cloth or leather, and Power or non-Power operated. The seats in the 2-door Coupe also tilt forward to allow rear seat access.

Pic will be here

The leather seats were available in 2 versions: regular, and “pillow top.”

Pillow top pic

Regular leather seat pic

The Sport seats and the wide body seats all used 5 mounting studs that went thru the floor pan. One corner mount had 2 studs; the other corners had 1 stud. There are rectangular reinforcing plates on the bottom of the floor pan, one for each stud.

The Power seat mounts used 4 studs, one in each corner. The double stud mount was eliminated due to the design of the power seat base.

To be continued…