Difference between revisions of "Rollguy's Front Seat Angle Fix/Mod"

From Eaglepedia
Jump to: navigation, search
Line 2: Line 2:
  
 
I used a speaker magnet to catch all the metal chips (worked great!).
 
I used a speaker magnet to catch all the metal chips (worked great!).
[[Image:http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0474.jpg]]
+
http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0474.jpg
  
  

Revision as of 21:59, 29 July 2011

I don't like the angle of the driver seat back (furthest forward notch), so I figured out a way to make it more upright. I removed the 3 torx screws holding the seat back hinge, and drilled 3 more holes to the left (counter-clockwise) of the original 3. Use a compass to mark the centerline of the radius (I failed to do this, and had to use a die grinder to get the holes just right).

I used a speaker magnet to catch all the metal chips (worked great!). http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0474.jpg


Photo of the new mounting position: File:Http://i84.photobucket.com/albums/k13/rollguy/Eagles/100 0475.jpg


Photo of the finished job: File:Http://i84.photobucket.com/albums/k13/rollguy/Eagles/100 0476.jpg


Notice that both seats are in their forward most notch. I still have 2 more rearward notches to match the same angle as the passenger side.