Difference between revisions of "Rear Axle/Differential R&R"

From Eaglepedia
Jump to: navigation, search
 
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
1980-1983 AMC Eagle's
 
1980-1983 AMC Eagle's
  
  The Differential repair requires special skills and specialty tools.
+
The Differential repair requires special skills and specialty tools.
  
 +
The inspection procedures will tell if repairs are necessary.
  
  The inspection procedures will tell if repairs are necessary.
 
  
 +
<center>'''Rear Axle Differetial/Removal/Installation:'''</center>
  
 +
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialfigure13.jpg
  
 +
The differential can be checked and overhauled without removing the rear axle assembly.
  
<center>'''Rear Axle Differetial/Removal/Installation:'''</center>
+
Refer to <b>Figure 13</b> for part names and location.
  
 +
1.- Remove the axle shaft dust caps. Lossen the wheel nuts.
  
 +
2.- Raise the rear of the vehicle and place it on jackstands.
  
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialfigure13.jpg
+
3.- Drain the axle housing. Place oil pan under differential, loosen differential cover bolts and remove bottom 2 bolts.
  
 +
[[Image:yellowdifferentialcover.jpg|frame|Differential Cover is in Yellow|left]]
  
  
    The differential can be checked and overhauled without removing the rear axle assembly. Refer to <b>Figure 13</b> for part names and location.
 
  
1.- Remove the axle shaft dust caps. Lossen the wheel nuts.
+
 
2.- Raise the rear of the vehicle and place it on jackstands.
+
 
3.- Drain the axle housing.
+
 
4.- Remove the axle cover.
+
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
4.- Remove the axle cover - see image above.
 +
 
 
5.- Remove the wheels, brake drums, hubs, axel shaft and seals. Keep the axel parts separated according to the side of the vehicle from which they were removed.
 
5.- Remove the wheels, brake drums, hubs, axel shaft and seals. Keep the axel parts separated according to the side of the vehicle from which they were removed.
 +
 
6.- Mark the bearing caps with a centerpunch for reassembly reference.
 
6.- Mark the bearing caps with a centerpunch for reassembly reference.
 +
 
7.- Loosen the bearing cap bolts until only a few threads remain engaged. Pull caps away from bearings. This will prevent the differential assembly from falling out in set 8.
 
7.- Loosen the bearing cap bolts until only a few threads remain engaged. Pull caps away from bearings. This will prevent the differential assembly from falling out in set 8.
 +
 
8.- Pry the differential loose in the axle housing with a pry bar.
 
8.- Pry the differential loose in the axle housing with a pry bar.
 +
 
9.- Remove the bearing caps. remove the differential assembly.
 
9.- Remove the bearing caps. remove the differential assembly.
 +
 
10.- Tie the bearing shims to their respective caps and cups to prevent them from being mixed up or misplaced.
 
10.- Tie the bearing shims to their respective caps and cups to prevent them from being mixed up or misplaced.
 +
 
11.- Installation is the reverse of removal. tighten all fasteners to specifications.
 
11.- Installation is the reverse of removal. tighten all fasteners to specifications.
  
[img width=613 height=477]http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialtable1.jpg[/img]
+
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialtable1.jpg

Latest revision as of 22:17, 21 July 2006

1980-1983 AMC Eagle's

The Differential repair requires special skills and specialty tools.

The inspection procedures will tell if repairs are necessary.


Rear Axle Differetial/Removal/Installation:

http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialfigure13.jpg

The differential can be checked and overhauled without removing the rear axle assembly.

Refer to Figure 13 for part names and location.

1.- Remove the axle shaft dust caps. Lossen the wheel nuts.

2.- Raise the rear of the vehicle and place it on jackstands.

3.- Drain the axle housing. Place oil pan under differential, loosen differential cover bolts and remove bottom 2 bolts.

Differential Cover is in Yellow



















4.- Remove the axle cover - see image above.

5.- Remove the wheels, brake drums, hubs, axel shaft and seals. Keep the axel parts separated according to the side of the vehicle from which they were removed.

6.- Mark the bearing caps with a centerpunch for reassembly reference.

7.- Loosen the bearing cap bolts until only a few threads remain engaged. Pull caps away from bearings. This will prevent the differential assembly from falling out in set 8.

8.- Pry the differential loose in the axle housing with a pry bar.

9.- Remove the bearing caps. remove the differential assembly.

10.- Tie the bearing shims to their respective caps and cups to prevent them from being mixed up or misplaced.

11.- Installation is the reverse of removal. tighten all fasteners to specifications.

http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialtable1.jpg