Pinion Seal Replacement

From Eaglepedia
Revision as of 00:35, 28 September 2006 by IowaEagle (Talk | contribs)

Jump to: navigation, search

Written by AMC Eagle Nest Member "Trapper Jack"

Things you will need

Seal I used from Advance Auto--part #470331N (Federal-Mogul)

1 1/8" socket for pinion nut

3/8 socket for u-joint

Tape to tape up caps on u-joint (don't want to lose the innards)

Drain pan to catch gear oil.

Breaker bar, torque wrench, impact wrench if you can round one up.

Paint or something to matchmark before removal.


Your starting point will probably look something like mine did


Pinionseal02.jpg