Difference between revisions of "Ignition Key - chime"

From Eaglepedia
Jump to: navigation, search
m (Reverted edits by Smitch (Talk); changed back to last version by Whuntmore)
 
Line 1: Line 1:
 
Submitted by Iron Horse
 
Submitted by Iron Horse
  
to get your lights er arms on the right ... de-energized contacts OPEN.
+
to get your lights to shut off with the key ... wire in this relay as shown. 
 +
 
 +
[[Image:ignition key chime.jpg]]
 +
 
 +
Access the grounds to the headlamps at lamp sockets ... there is a ground wire on each lamp ( four in all ).
 +
The relay coil will only draw milli amps so you can attach to any accessory power wire. Relay contacts must be able to carry at least 10 amps ... the safety is that if the grounds short to ground worst case is that lights will have to be turned off by the lite switch as normal.
 +
The ACC wire should be fused where you attach it.
 +
 
 +
Note: relay is shown ON ... wiper arms on the right ... de-energized contacts OPEN.

Latest revision as of 22:32, 29 April 2013

Submitted by Iron Horse

to get your lights to shut off with the key ... wire in this relay as shown.

Ignition key chime.jpg

Access the grounds to the headlamps at lamp sockets ... there is a ground wire on each lamp ( four in all ). The relay coil will only draw milli amps so you can attach to any accessory power wire. Relay contacts must be able to carry at least 10 amps ... the safety is that if the grounds short to ground worst case is that lights will have to be turned off by the lite switch as normal. The ACC wire should be fused where you attach it.

Note: relay is shown ON ... wiper arms on the right ... de-energized contacts OPEN.