How To Drive Without Half Shafts

From Eaglepedia
Revision as of 16:29, 21 November 2012 by Smitch (Talk | contribs)

Jump to: navigation, search

Contributed by Amceaglenest member IRON HORSE

I wanted to share a way to drive your Eagle without the front axles. (Remove both half shafts even if only one is bad to prevent front differental ware) ... You need four 2" dia. washers with 3/4" hole. Also need two 5 inch long x 3/4" bolts, nuts and lock washers for the bolts. Cut two pieces of 3/4" inner dia. heater hose about 3" long.