Difference between revisions of "Grm"

From Eaglepedia
Jump to: navigation, search
m (Front Axle/Differential R&R moved to Grm: why not)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
1980-1983 AMC Eagle's
 
1980-1983 AMC Eagle's
  
Differential repair requires special skills and specialty tools.
+
Db> Zero
 
+
Inspection procedures found elsewhere in the AMC Eaglepedia will tell if repairs are necessary.
+
 
+
<center>'''Front Axle Differetial/Removal/Installation:'''</center>
+
 
+
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialfigure10.jpg
+
 
+
 
+
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialfigure11.jpg
+
 
+
1.- Remove the axle assembly.
+
 
+
2.- Remove the axle housing cover bolts and cover.
+
 
+
3.- Mark the differential bearing caps with a centerpunch for reassembly alignment reference.
+
 
+
4.- Loosen but do not remove the fiferential bearing cap bolts.
+
 
+
5.- Install an axle housing spreader (tool part No. J-24385-01) and spreader adapters (toll part No. J-24161) as shown in <b>Figure 23.</b> Used hold-down clamps to keep spreader in position.
+
 
+
6.- Install a dial indicator as shown in <b>Figure 23.</b> Zero the indicator gauge. make sure the indicator plunger touches one side of the housing opening
+
 
+
 
+
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialfigure23.jpg
+
 
+
<center>'''CAUTION:  Do not exceed the specified housing spread in Step 7.'''
+
 
+
'''Spreading the housing  greater amount than specified can cause damage or distortion.'''
+
</center>
+
 
+
 
+
7.- Slowly spread the housing 0.020 in. (0.50 mm) while watching the indicator. Remove the dial indicator when housing spread is complete.
+
 
+
8.- Remove and tag the differential bearing caps for reassembly reference.
+
 
+
9.- Position one pry bar under the ring gear bolt head and a second pry bar under the differential case. remove the differential assembly from the housing.
+
 
+
10.- Remove the spreader tool to prevent the possibility of housing distortion.
+
 
+
11.- Installation is the reverse of removal. Tighten all fasteners to specifications.
+
 
+
 
+
http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialtable1.jpg
+

Latest revision as of 21:27, 21 November 2012

1980-1983 AMC Eagle's

Db> Zero