Gasket Making

From Eaglepedia
Revision as of 22:47, 18 December 2010 by IowaEagle (Talk | contribs) (New page: By Jim and WonderEagle Hey, here's a How To. When you need to make a gasket and it isn't practical to lay it on the piece and tap it out with a ball peen hammer: first, go to your residen...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

By Jim and WonderEagle

Hey, here's a How To. When you need to make a gasket and it isn't practical to lay it on the piece and tap it out with a ball peen hammer: first, go to your resident expert crafter and ask advice about whether the pattern smells too strongly of gas to work on at the breakfast bar, what tools to use, etc. Wink Start doing as she instructed. When she sees how incompetent and bungling you are let her take over. You will end up with gaskets that appear to be factory made. Grin I wonder if Doug will put this in the 'pedia?